Wincor Nixdorf BA80 Service Manual

BA80 8.4" TFT LCD Monitor Operating Manual

4 will not be covered by the warranty. All parts of the product which are subject to wear and tear (e.g. backlight of the LED) are not included in th

5 Introduction The ergonomic and user friendly flat-panel display BA80 can be applied in all trade market segments like specialist retailers, departm

6 Unpacking and checking the Delivery Unit Unpack the parts and check to see whether the delivery matches the infor-mation on the delivery note. Th

7 BA80 Components Screen Module The screen module represents the main unit of the BA80. It comprises of a TFT-LCD colour screen. The TFT LCD flat sc

8 Dual Display Holder (optional) The Dual Display Holder offers the possibility to mount a customer display to the rear side of a cashier display. Th

9 Mounting the Tube Adapter Take the tube adapter out of the cardboard box and lput it next to the dis-play. For the mounting you need a Phillips hea

10 Put the display with the adapter on the preinstalled tube (1) and fix it with the screw (2). Installing the Base Take the base and the scr

11 Remove the four screws at the rear side of the BA80. Move the bezel out of the guidance of the screen ele-ment. Plug the connector cables.

12 Set the BA80 with back panel on the base and fix them with the 2 remaining screws. Mind the cable laying. If you are operating the BA8

13 Table Mounting There are two holes in the BA80 stand (see arrows). The holes can be used to fix the stand on the footprint with appropriated screw

We would like to know your opinion on this publication. Please send us a copy of this page if you have any constructive criticism. We would like to

14 Ergonomical Adjustment of the BA80 Please observe the following when setting up your terminal workplace: Avoid direct glaring and re-flective gl

15 Installation Connecting the VGA cable Plug the VGA cable connec-tor into the VGA jack of the PC/POS. Secure it by tight-ening the screws. Plug

16 Push Buttons at the Bottom Side Status LED Information Find the LED is at the bottom side of the monitor. Function Di

17 On Screen Display (OSD) The menu of the On Screen Display offers the opportunity to change the pre-set values of the monitor such as brightness, c

18 Main Menu After starting the OSD the main menu functions will been shown. Auto Adjust Select the auto adjust function by pressing the according

19 Submenu Luminance (Brightness) Adjustment by hand. Standard: 90 If the value is set too high, bright surfaces can not be distinguished

20 Submenu Luminance (Contrast) Adjustment by hand Standard: 90 If the contrast is set too low, the maximum brightness will not be achieve

21 H.Position You can shift the horizontal position of the screen contents to the right or to the left. Standard: 51 V.Position You can shift th

22 Pixel Clock Menu for adjusting the pixel frequency of the video converter analogue to the lock rate of the video input. Standard: 49 Phase Me

23 Color Chose a convenient and ideal display presentation with the settings of the luminance together with the settings for the color. There are

BA80 8.4” (21,3 cm) TFT LCD Monitor Operating Manual Edition December 2011

24 OSD The OSD menu gives you the opportunity to set the screen location of the OSD frame and the displaying duration time. H.Position Adjust OSD

25 V.Position Adjust OSD frame’s vertical location Adjustment by hand. OSD Timeout For adjusting the time interval (1 to 60 seconds) for displa

26 Language The OSD can be displayed in seven different languages. The default setting is “English”. There is a choice between a traditional or a sim

27 Color Recall The menu initializes the colour settings to the default values. Recall All With this menu you can simultaneously initialize all s

28 Miscellaneous Menu to adjust the display sharpness and to call up display information. Sharpness Sharpness preserves the eyes. An optimal displ

29 Display Information Find here information about the installed display solution (pixel) and the refresh rate (Hz). EXIT This function immediate

30 Technical Data Model BA80 Cabinet color Light Grey or Black Display size 8.4" Dimensions (W x H x D in mm) 200 x 180 x 36.4 Active Area

31 Dimensions Indications in mm

32 With Base

33 With Tube Adapter

All brand and product names mentioned in this document are trademarks of their respective owners. Copyright © Wincor Nixdorf International GmbH,

Wincor Nixdorf International GmbH D-33094 Paderborn Order No.: 01750215139C

Contents Contents ...6 Manufacturer’s Declarat

User Preset ... 23 OSD...

1 Manufacturer’s Declaration and Approval General Authorization This device fulfills the requirements of Electromagnetic Compatibility (EEC) standar

2 User Information Wincor Nixdorf (WN) does not accept responsibility for radio and TV interfer-ence and faults that care caused by unauthorized chan

3  In case of emergencies (e.g. damaged housing, liquid or foreign objects getting into the device), the device should be switched off immediately,